PROXXON means advanced, competitive, high quality technology.
PROXXON individually test each product as it leaves the factory to ensure that it arrives with you in immaculate condition.

PENSANDER PS 12Ideal for working on surfaces in recesses, slots and small corners. Linear stroke of 8,000 per minute, 2.5mm stroke length. Housing of fibreglass reinforced POLYAMIDE. Four sanding arbours with straight shanks and four angled ( all different shapes ) as well as three sets of pre-profiled self-adhesive sanding pads are included. The sheets are of grits 180, 240, and 400 with 5 of each shape per sheet.Used with variable speed transformer 28707 the pensanded can be regulated for gentle sanding on delicate materials.The Pensander costs £26.86 including postage to a UK address.£26.86 50/E PRECISION MILLING/DRILLING MACHINEVariable speed mill / drillThe thyristor electronic speed control enables the selection of speeds from 5,000 to 20,000 rpm. Used with variable speed transformed 28707 it is possible to regulate the speed even further. Phase angle control and feedback effect circuitry yield high torques, even at low speeds. Six MICROMOT collets for shanks covering 1.0 - 1.5 - 2.0 - 2.4 - 3.0 and 3.2mm are supplied. Power consumption is 40W max. length 220mm and weight 230g.The drill/mill costs £27.22 including postage to a UK address.£27.22 FLEXISHAFT 100/PTwo ball bearings in the turned, light aluminium hand piece and one in the drive end prevent tool bit chatter. The highly flexible shroud and core effortlessly transmit power without heating up when bent tightly. Antikink springs at the grip and drive end prevent kinks. Six MICROMOT collets for shanks covering 1.0 - 1.5 - 2.0 - 2.4 - 3.0 and 3.2mm are supplied. The drill and stand are not supplied, but are included for illustrative purposes only.The flexishaft costs £32.47 including postage to a UK address.£32.47 MICROMOT mains adapter NG 2/EVery compact design. NORYL heat resistant casing. Capacity 2.0A atr 16 Volt open circuit - and 12 Volt under load = 24VA (DC). :Primary supply 220 - 240V. Polarised socket for MICROMOT plug. Red LED indicates readiness for use. Positive temperature coefficient element prevents overload (and plugged in tool will not automatically restart). After cooling down, the mains plug should be disconnected briefly to reset the adaptor.Modern design with holes for storing bits. Foldable tool rest provides a secure place for keeping the MICROMOT tool at the ready. Thyristor electronic speed control (with feedback) for adjusting bit speed to suit the job, as well as providing high torque at low speeds.The drill and bits are not supplied, but are included for illustrative purposes only.The mains adaptor costs £29.25 including postage to a UK address.    £29.25 MICROMOT precision drill grinder FBS 12/EIncludes keyless chuck (capacity 0.3 - 3.2mm). A precision ball bearing minimises spindle side play. Spindle lock button for bit changing obviates the need  for spanners. Recessed spindle head for inserting MICROMOT steel collets (available separately). Efficient forced ventilation cooling of high quality 5 pole motor. Fibreglass reinforced POLYAMIDE casing.12 - 18VDC, maximum power comsumption 100W. Electronic speed control of 3,000 - 15,000rpm. Length 185mm and weight approx 450g. Mains adaptor NG 2/E is recommended.The drill grinder costs £37.14 including postage to a UK address.£37.14 JIG SAW STS 12/EEasy curved and intricate sawing of wood (up to 10mm) , and non ferrous metal (up to 2.5mm). The powerfull 5 pole motor operates off 12 - 18VDC with power consumption up to 100W. The stroke is 6mm and speed is variable between approx. 2,000 and 5,000 per min. Housing of reinforced POLYAMIDE. Includes 2 blades (coarse and fine). Mains adaptor NG 2/E is recommended.The jigsaw costs £42.86 including postage to a UK address.£42.86 MICROMOT drill stand MB 140/SThe 120 x 220mm table is milled and fitted with a fence and scale. The solic column is chrome plated. The headstock is of diecast aluminium, offering a throat capacity of 140mm amd 30mm travel.A chromed feed lever operated via a drive disc and ball bearing system, offering a sensitive feed set-up. T-bars allow simple height adjustment as well as the fixing of the mill drill in the 20mm bore fitting. The mill drill collar, with scale, tilts through 90deg. in both directions.A depth stop as well as drilled, tapped holes for securing the KT 70 compound table and holes to fix the MBS itself are also provided. The drill and machine vice are for illustrative purposes only and are not included.The drill stand costs £55.95 including postage to a UK address.£55.95 Machine vice MS 4 Die cast zinc with three machined sides. The slot fits the adjustable fence of the drill stand MB 140/S.Horizontal and vertical V-slots in jaw. Jaw width 50mm and height 10mm. Maximum clamping width 34mm.For illustration see drill stand MB 140/S.The machine vice costs £15.09 including postage to a UK address.£15.09 Micro compound table KT 70Made of solid aluminium with surface treatment and fitted with adjustable dovetail gibs and three T-slots of the MICROMOT standard (12 x 6 x 5mm). Adjustable ruler eases workplace positioning. Both handwheels have zero-resettable dials with graduations indicating 1 revolution = 1.0mm and 1 division = 0.05mm. The clamps and securing bolts for the MB 140/S are included.Table size 200 x 70mm. X travel 134mm and Y travel 46mm, maximum height 43mm.The compund tabble costs £85.95 including postage to a UK address.£85.95